Multiple Spacer
It is to be applied at the iron bar crossing point of electrowelded meshes.
Cone-Shaped Spacer
It is used at the iron bar crossing point and it is overturning-safe.
Tower Spacer
It is used for horizontal meshes or rod irons up to Ø 26mm.
Deep Center Spacer
It is used for horizontal formworks with safe clamping of the rod iron.
Cross Spacer
It is used for iron bars of horizontal formworks; It has a high opening elasticity.
Tunnel Spacer
It is used for roofings. It links the trestle to the mesh spacing it from the box.
Concave Spacer
It is used for heavy horizontal formworks with rod iron.
Concave Spacer with Hooks
The hooks allow to clamp the rod iron.
Ring Spacer
It is studied for a very good distribution of weights and can be used also vertically.
Heavy Bar Spacer
It measures 55 cm, and it allows to support formworks thanks to its shape and structure.
Spacer Support
It offers greater safety when laying the formwork iron bar. 2 mt in length.
Distanziatore Rettangolare
With mesh fixing hook, highly stable and stout. It measures 270 mm x 95 mm.
Ganci Metallici
Di rapido utilizzo, massima affidabilità e basso costo.
Wheel Spacer
It is used for vertical and horizontal formworks with rod iron or mesh.
Double Spacer
It is used to space the double formwork from the box. It is very precise, stable and stout.
Plate
It is used to stock prefabricated panels and on the corners during transport.
Shimmed Bases
Particularly suitable to vertically and horizontally plumb prefabricated items. Extremely high mechanical resistances.
Dismantling Oil Pump
It is very useful to apply the dismantling oil.
Concrete Spacers with Length of Wire
It is made of siliceous sand and highly resistant concrete.
Gilled Pipe
It is used as a spacer from the box and a sheath for the iron tie rod.
Gilled Pipe Plug
It is used to plug the holes left in the wall by the gilled pipe after dismantling.
Smooth Pipe
It is used as a spacer from the box and a sheath for the iron tie rod.
Smooth Pipe Plug
It is inserted into the pipe for a perfect support to the box. It can be recovered.
Release Sheath
It is made of elastic PVC, and used to sheathe the formwork strands.
Laminated Sheath
It is made of soft PVC to sheathe strands.
Drip
It is used to build the drip of balconies and gutters.
Bevel
It is made in PVC, and used to bevel the pillar corners.
Bevel with Fin
Made in PVC, it is used to bevel the pillar corners.
Spacing Blade Section
It is used as a spacer in the panel metal boxes and a sheath to the iron blade.
Polyethylene Sections
They are used to fill the expansion joints and all cracks in order to seal.
Tile Cross Spacer
It allows to obtain straight spaces.
Tile T Spacer
It is used to lay tiles near the walls.
Levelling Wedge
It is suitable when there are differences in the laying surface level.
Round Support + Bearing Level
They allows to lift the floor, thus offering the possibility to ventilate and inspect the slab.
